Titanium Strip et Foil
• Tittanium exue et ffoyle Materials:Pura Titanium (CP) et Titanium foil stannum;Grade 1, Grade II, Grade V, Grade V, Grade VII et Grade IX
• FormaeSingula habena, in coil, vel in FUSUS.Slitting ministerium praesto
• Ratio:Crassitudo: ≥0.01mm : 20～1000mm, Longitudo: Rogatio
• Conditiones:Frigus involutus (F) ~ Hot involutus (R) ~ Annealed (M) * Firmus Status
• Signa:ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc.
• Applications.Electronicae, oeconomiae, vigiliae, specula, ornamenta, bona ludicra, machinamenta, armamenta tabulae, apparatum environmental, golf et machinis industrias praecisionis.
| Titanium Alloys Material Common Name | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Titanium Strip et Foil:Maxime purum titanium exuunt Gr1, Gr2, Gr4 gradus;Ad titanium mixturae Foil, maxime providemus Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 et aliis gradibus, Fiunt ex lamina titanii cum volvente ulteriore frigido;processus productionis schedae titanii magis implicata est.Imperium deformatio arctius in processu volutionis est. Quod in diversis magnitudinibus secari potest secundum necessitates emptoris, valde breviat tempus traditionis.
♦ Titanium Exue Chemical composition ♦
| Gradus | Compositio chemica, pondus centesimis (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Alia Elementa Maximilianus.quisque | Alia Elementa Maximilianus.total | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.014 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.014 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.014 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.014 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.014 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.014 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Titanum Alloy StripCorporalis proprietatibus ♦
| Gradus | Corporalis proprietatibus | |||||||
| Distrahentes fortitudo Min | Cedat imperiumMin (0.2%, offset) | Prolongatio in 4D Min (%) | Reductio Area Min (%) | Inclinate Test (Radius Mandrel) | ||||
| ksi | MPa | ksi | MPa | 1.8mm in thickness | 1.8-4.8mm in crassitudine | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 | 4.5T | 5.0T |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 | 2.0T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 | 4.5T | 5.0T |
♦ ♦ ♦ Titanium Alloy Materials Features: ♦ ♦ ♦
•Gradus 1: Pure Titanium, relative humilis fortitudo et princeps ductilis.
•Gradus II: Sincerus titanium maxime usus est.Optimum compositum ex viribus
•Gradus 3: Alti roboris Titanium, Matrix laminis usus est in concha et tubi cauponibus caloris
•Grade V: Fabricatissimum Titanium offensionis.Vires nimis altae.magno fervore resistente.
•Gradus 7: Superior corrosio resistentiae in ambitibus reducendis et oxidendis.
•Grade 9: Sublimes vires et corrosio resistentia.
•Gradus XII: Melior calor resistentia quam pura Titanium.Applications ut ad Gradus VII et Gradus XI.
•Gradus 23: Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy ad applicationem chirurgicam implantandi.
