Incoloy800/800H/800HT fabricare
Incoloy 800(UNS N08800), Nickel Alloy 800, Inconel 800, W.Nr 1.4876
Incoloy 800H (UNS N08810), Nickel Alloy 800H, Inconel 800H, W.Nr 1.4958
Incoloy 800HT (UNS No8811) NickelIncoloy 800HT, W.Nr 1.4959
Incoloy Alloy 800 est materia structuralis late adhibita instrumenti instrumenti quae altam vim habere debet et resistere oxidationis, carburisandi et aliis nocivis effectibus caliditatis expositae (pro caliditas applicationes quae requirunt optimales subrepentes et fracturae proprietates, uti Incoloy Alloy 800H et 800HT).
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | Al+Ti |
| Incoloy 800 | Min. | 30 | 19 | statera | - | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Maximilianus. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.014 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800H | Min. | 30 | 19 | statera | 0.05 | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Maximilianus. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.014 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800HT | Min. | 30 | 19 | statera | 0.06 | - | - | - | - | 0.25 | 0.25 | 0.85 |
| Maximilianus. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.014 | 0.60 | 0.60 | 1.2 |
| Density (g/cm*3) | Liquescens punctum ( ) | Modulus elasticus ( GPa ) | Scelerisque conductivity λ/(W(m•℃)) | Scelerisque expansion coefficientes (24 -100°C) (m/m °C) | Operating Temperature (°C ) |
| 7.94 | 1357-1385 | 196 | 1.28 | 14.2 | -200 ~ +1,100 |
| Alloy | Forma | Conditio | Ultima distrahentes vires ksi (MPa) | Cedant strengthat 0.2% offsetksi (MPa) | Prolongatio in 2″vel 4D, percent |
| 800 | Sheet, Plate | Annealed | 85 (586) | 40 (276). | 43 |
| 800 | Sheet, Plate Exue, Bar | Annealed | 75 (520)* | 30 (205)* | 30* |
| 800H | Sheet, Plate | SHT | 80 (552). | 35 (241). | 47 |
| 800H | Sheet, Plate Exue, Bar | SHT | 65 (450)* | 25 (170)*. | 30* |
Incoloy 800/800H/800HT signa et Specificationes
| Bar/Rod | Filum | Exue/Coil | Sheet/Plate | Pipe/Tube | Decens |
| ASTM B 408 & SB 408 | ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3 | ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Cas 1325, 2339 | ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095 | ASTM B 163/ SB 163 | ASTM B366 |
Incoloy 800/800H/800HT Available Products in Metallis Sekonic
Incoloy 800/800H/800HT Bars & Rods
Bars/Flat bars/Hex repagula;Magnitudo A 8.0mm-320mm, Pro fulminibus, claustris, et aliis partibus parce
Incoloy 800/800H/800HT Wire
Copia in filo glutino et filo vernali in coil forma et longitudine incisa.
Incoloy 800/800H/800HT Flange
Signa magnitudinis et dimensio nativus a nobis produci possunt cum certa tolerantia
Incoloy800/800H/800HT sheet & plate
Latitudines usque ad 1500mm et longitudinem usque ad 6000mm, Crassitudo ab 0.1mm ad 100mm.
Incoloy 800/800H/800HT inconsutilem tube & iuncta pipe
Signa magnitudinis et dimensio nativata cum parva tolerantia a nobis produci possunt
Incoloy 800/800H/800HT habena & coil
Mollis conditio et dura conditio cum superficie clara AB, latitudo usque ad 1000mm .
Incoloy 800/800H/800HT Fasteners
Admisce materias in formis fulminum, coclearum, flangum et aliis velocioribus, secundum specificationem clientium.
Cur Incoloy 800/800H/800HT ?
• Praeclara corrosio resistentiae in instrumentis aquae calidissimae caliditatis 500℃.
• bonum accentus corrosione resistentia
• bonum machining
• High repunt vires
• Optime resistentia oxidationis
• Bona resistentia ad vapores combustiones
• Ipsum bonum resistentia carburization
• Bene resistentia ad nitrogenium effusio
• bonum sistens stabilitatem in altum temperaturis
• bonum weldability
Incoloy 800/800H/800HT Application agri
• Ethylene fornax extinguet boilers?• Hydrocarbon crepuit
• Valvulae, caerimoniae et alia componentia oppugnationi corrosivae exposita ab 1100-1800° F
• Fornacibus Industrial• Caloris ubi apparatibus
• Chemical et petrochemical processus • Caloris nummularii
• Super calefacientis et rursus calentium in potentia plantis • Pressura vasorum
